-
Fully compatible with all Garrett GTI models (including the 1500, 2000, 2500)! The GI-1 is precision built to ensure peak performance.
-
Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on detector used, settings, ground and moisture conditions!
-
Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper shaft for easy access. GI-1 probe and cable weigh approx. 6 oz. GI-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 11 oz total!
-
While the GI-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as Garrett.)
-
Installation requires no tools or modifications to the detector.
-
The GI-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions! (The GI-1 probe is non-imaging and depth reading will be off due to the probe's diameter, which is normal.)
-
High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a very flexible heavy duty custom 30" straight cable with strain relief for "tangle free" operation.
-
Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
-
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
-
GI-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
-
No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
-
No extra batteries required as the GI-1 utilizes the detectors power source.
-
Complete installation & operation instructions included.
